Fuel Theft Vehicles
Guidance on recognizing and responding to Illicit fuel theft and transport vehicles
Overview
Vehicles are being converted by criminals to facilitate the theft and transport of fuel. The vehicles are often vans or box vans, equipped with drums or intermediate bulk containers (IBCs), also know as totes, to hold the stolen fuel.
See also pages for Drums and Intermediate Bulk Containers (IBC)
PHOTO: Illustration of a typical fuel theft vehicle. The vehicle may be have an access panel in the bottom to facilitate parking over underground storage tanks and discreetly pumping out the fuel or a false fuel fill door that actually leads to the containers inside the vehicle. The false fuel door allow fuel to be stolen from the pumps often with a stolen credit card. [Image by ER Playbook]
Common Theft Methods
Stolen Credit Card
Suspects use a stolen credit card to pay at the service station fuel pumps. They then pump large quantities of fuel into an improvised hidden compartment in the vehicle.
Tank Theft
Steal fuel directly out of the underground storage tanks at the gas station. This often includes a hidden compartment in the bottom of the vehicle and an onboard pump. The vehicle parks over the top of the underground tank covers, the cover is removed, and hose is lowered into the underground tank to pump stolen fuel into barrels or a tote onboard the suspect vehicle
Photo: Commercial truck with a hidden tank. [Copyright ER Playbook].
Recognition Clues
- Commonly trucks, vans, and SUVs are used for fuel theft.
- Windows may be painted black or obscured
- Barrier or curtain obscuring the cargo area from the driver compartment of a van or SUV
- Odor of fuel emanating from the vehicle
- Vehicle suspension sitting low or tires bulging from the weight of the fuel
- Vehicle sways or leans when stopping or turning due weight and liquid fuel shifting
PHOTO: Fuel theft vehicle indications. [Copyright ER Playbook]
Some recognition clues for a fuel theft vehicle may be similar to an vehicle borne improvised explosive device (VBIED) or vehicle used to employ a Fire-as-a-Weapon (FaaW) attack. Based on the totality of the circumstances, consider the need for support from a bomb squad.
Response Considerations
Incident Managment
- Request law enforcement and establish unified command
- Request a HazMat team
- Consider the need for foam resources
- Develop an incident action plan (IAP)
Arrival and Control Zones
- Position apparatus uphill from the fuel theft vehicle in case a leak/breach occurs
- Ensure personnel and apparatus has an escape route for emergency retreat if necessary
- Isolate and deny entry to areas downgrade of the suspected vehicle
- Consider the need to evacuate vehicles and buildings downgrade of the suspect vehicle
A fuel breach, leak, or ignition may occur at any time. Ensure personnel are standing or operating in a safe location as a leak or ignition may occur at any time.
Fire Suppression
- Consider the need for a bulk foam resource (foam tender, trailer, or ARFF truck)
- Be prepared for a potential of a three dimensional rolling fuel fire, that can suddenly grow in size and intensity
- Understand that water will be ineffective in controlling all but a very small amount of burning gasoline or diesel fuel
- Consider gathering dry chemical fire extinguishers from apparatus on scene to combat running fuel fires.
Water can intensify and spread a flammable liquid fuel fire. If fire firefighters direct their hose line stream into the cargo area of a truck or passenger compartment of a minivan or SUV and the fire suddenly intensifies or grows, they should suspect the vehicle is carrying an additional fuel load and should stop applying water directly to the fire.
Leak/Spill Control
- Eliminate ignition sources in the area
- Perform spill control measures if vehicle is leaking.
- Consider proactively damning/diking drains even if vehicle is not leaking yet.
- Notify environmental AHJ if a reportable release occurs
- Conduct risk/benefit analysis before committing personal to the interior or cargo area of a fuel theft vehicle with an active leak or flammable environment.
Product Transfer
- Consider transferring the fuel out of the fuel theft vehicle before the vehicle is towed
- Ensure the receiving container is compatible and approved
- Perform bonding and grounding
Some fuel theft vehicles may use plastic/poly containers for gasoline. These containers may be non-conductive which may prevent proper bonding and grounding and increase the risk of fire from static electricity.


